3-5
MlDl Bulk Dump
The bulk dump function can
be
executed from this page.
UTY3
-
5
BULK
DUMP
1
1
PATCH
MEM OK?
Bulk dump is a function that lets you transmit via MIDI all
of the Patch setting and MIDI setting
data
of the 9030.
Helpful Hint:
When a bulk dump is executed, MIDI system exclusive mes-
sages
are
transmitted via the MIDI
OUT
terminal. If you
have a sequencer or computer software program capable of
recording system exclusive messages, you can store all set-
tings of the 9030 to a floppy disk. The bulk dump function
can also
be
used to copy the
data
to another 9030.
Select the type of
data
to
be
output by using the DEC V/INC
A
keys and execute the bulk dump by pressing the
STORE/EXECUTE key. The following types
can
be
selected:
ALL
--
All settings of the 9030
Patch
--
All
Patch
memories from
1
to 99 (including Patch
names)
SYSTEM
--
Settings of the Utility mode, excluding Patch
names
EDIT
BUFFER
--
Data of the edit buffer (including Patch
names)
Functions of the Panel Keys
UTILITY key
--
Moves
to
the next page (Patch recall).
DEC
VhNC
A
keys
--
Set the parameter values.
EDIT
c
/
>
keys
--
Pressing the EDIT
c
key moves back
to
page
3-4,
and
pressing the EDIT
>
key moves to page 3-6
(MIDI bulk load).
Note:
In order
to
execute the bulk dump, the MIDI/remote mode
parameter (page
47)
must
be
set to MIDI
OUT
MODE. The
following error message is displayed when this setting has
not been made.
UTY3-5 BULK
DUMP
Set to
MlDl OUT MODE
3-6
Loading MlDl Bulk Data
This function
lets
you load
data
via bulk dump
to
the internal
memory of the 9030.
I
UTY3-6
BULK
LOAD
Now
wai
t
i
ng
There is no particular parameter to
be
set in this display. The
9030 receives system exclusive messages from the MIDI IN
terminal only when this display is called up.
Helpful
Hint:
This function is used
to
reload
data
to 9030 that was previ-
ously recorded to a sequencer or computer. This display
should also be used when executing a bidirectional data
transfer with a computer, or when receiving
data
from anoth-
er 9030.
Functions of the Panel Keys
UTILITY key
--
Moves
to
the next page (Patch recall).
EDIT
<
/
>
keys
--
Pressing the EDIT
<
key moves back to
page 3-5,
and
pressing the EDIT
>
key moves
to
page 3-1.
Note:
In order to execute this bulk load operation, the MIDI/remote
mode parameter (page
47)
must
be
set
to MIDI OUT MODE.
The following error message is displayed when this setting
has not been made.
UTY3-6
BULK
LOAD
Set
to
MlDl OUT MODE
To Next Page
Loading...
