Zoom 9030 - Table of Contents

Precautions 4
Outline of the Manual 5
Section I: Introduction 6
Terms Used In the Manual 6
Names and Functions of the Controls
and Terminals
7
Section II: Tutorial 10
Connect ions
Setup
Using Effects
Editing Effects
Compare
Storing the Edited Patch
Section
Ill: Play Mode
Functions of the Play mode
Setting the 9030 to the Play Mode
Display of the
Play mode
Selecting Patches
Bypassing All Effects
Changing the Master Level
Storing Patches from the Play Mode
Section IV: Edit Mode
Patch Structure
Effect Modules
Effect
Types
Routing
Edit Mode
What is the Edit Mode?
Entering the Edit Mode
Selecting Effect Modules
Display of the Edit Mode
Changing Parameter Values
Selecting Pages
Turning the Effect Module Off
Real-time Modulation
Effect Types and Parameters
Compare
Memory Areas and Buffers
Storing In the Edit mode
Section
V: Utility Mode and Pop-up Menu -
Utility Mode
Entering the Utility Mode
Exiting From
the Utility Mode
Selecting Display Pages
Utility Mode Pages
Pop-up Menu
What is the Pop-up Menu?
1. Memorizing Program Change Numbers
2. Monitoring of the Control Change Number
Self-introduction Function
Section VI:
Example Applications
-
Remote Control and Real- time Modulation
Controlling the 9030 from the
8050
Equipment Connections and Settings
Selecting a Patch from the 8050
Bypassing All Effects from the 8050
Turning Off Each Effect Module from the 8050
Real-time Modulation Using the 8050
Controlling the 9030 with a Synthesizer
Connections
Equipment Settings
Selecting Patches of the 9030
from the Synthesizer
Real-time Modulation Using
the Modulation Wheel