The functions of the Play mode are fully explained
in
this
section.
(1)
Patch name
(2)
Output mode
(3)
Master level (volume)
Functions
of
the Play
mode
The Play mode is the basic mode of the 9030 in which
Patches
are
selected and played.
The following operations
can
be
done in the Play mode:
Selecting Patches
Bypassing all effects
Manually changing the master volume
Setting the
9030
to the Play Mode
When 9030 is in another mode, press the EXIT key repeated-
ly until the Play mode
is
selected. You can also turn the
power off and back on
again;
when the power is turned on,
the 9030
is
automatically set to the Play mode.
Effect indicator
--
Erfect modules which
are
currently on
in
the selected Patch light up in
red.
Modules which
are
off
in
the Patch light up
in
green.
Selecting Patches
Use the PATCH
VIA
keys
to
select a Patch.
Press the PATCH
A
key once
to
select the next highest Patch
number, and press the PATCH
V
key
to
select the next low-
est Patch number. The values
"wrap
around"; if Patch num-
ber
99
is currently selected and you press the PATCH
A
key,
Patch number
1
will be selected. Similarly, if Patch number
1
is selected
and
you press the PATCH
V
key, Patch number
99
will
be
selected.
Display
of
the Play mode
The following information is displayed on the panel fiom the
Play mode.
PATCH NO. indicator
--
This indicates the selected Patch
number
(1
-
99).
Display
--
The following information is shown in the
FL
display:
Patch number
Effect module
ON
Patch name indication (red)
Hi-Z
S~ML
INPUT
PHONES
DSP
I
ADVANCED
PITCH2
I
j[_
I
LIN/ST LVL
100
mEq
i
1
BYPAS
1
E]
COMPARE
EXECUTE
0
0
PAGE
00-
A
Output mode Master level Effect module
OFF
indication (green)
To Next Page
Loading...
