Zoom 9030 - Recognized Data

2.RECOGNIZED DATA
1) CHANNEL VOICE MESSAGES
STATUS SECOND THIRD DESCRIPTION
1011 nnnn Occc cccc
1100 nnnn Oppp pppp
ovvv vvvv
Ovvv vvvv
Ovvv
vvw
owv vvw
Ovvv vvw
ovw vvvv
Ovw vvvv
ovvv
vvvv
Ovvv vvw
owv vvw
ovvv vvvv
Ovvv vvvv
---- --m-
CONTROL CHANGE
ccc cccc : Control No.
(1-5,8-31,
33-37,40-69,80-90,92-95)
wv vvw : Real time modulation control Value
(See NOTE
1)
Master Output Level
vvv vvw
: Level
Compressor
vvv vvvv : Comp ON/OFF (See NOTE 2)
External Effect
wv vvvv
: EXT ON/OFF (See NOTE 2)
Distortion
vvv vvw
: DIST ON/OFF (See NOTE 2)
Equalizer
vvvvvvv
: EQ ON/OFF (See NOTE 2)
Amp Simulator
vw vvvv : AMP ON/OFF (See NOTE 2)
Effect1
vw vvvv : EFFl ON/OFF (See NOTE 2)
Ef fect2
wv vvvv
: EFF2 ON/OFF (See NOTE 2)
Reverb
vvv vvvv
: REV ON/OFF (See NOTE 2)
Special Effects
vvv vvvv
: SFX ON/OFF (See NOTE 2)
All bypass
vvv vvvv
: Bypass ON/OFF (See NOTE 3)
PROGRAM CHANGE
ppp pppp : Program Number (See NOTE 4)
NOTE :
* nnnn = MIDI Channel Number ( 0000 - 1111 )
1. CONTROL CHANGE message is recognized only when the control number is
matched with Control numbers selected by panel.
2. Effect module ON/OFF function is always recognized in BASIC Channel.
When value vvvvvw
is Of module is turned off.
When value vvvvvvv is 127, module is turned on.
3. Bypass function
is always recognized in BASIC Channel.
When value vwvvw
is Of Bypass is turned off.
When value vvvvvvv
is 127, Bypass is turned on.
4. Relationship between MIDI Program No, and Patch No. is assignable.