Bypassing
All
Effects
Alleffectscahb~~assdb~~ressingtheBYPASSke~in
StoringPatchesfromthePlayMode
the Play mode. The
"BYP"
indication in the display will
flash.
In
the effect indicators, the indicator'of the effect
U,
this
store
operation
when
you
wish
save
the
master
being
used
changes
From
red
to
which
indicates
that
level setting of a Patch or copy a Patch to a different
Patch
the effect
has
been temporarily turned off.
number.
LIN/ST
LVL
100
ADVANCED PlTw21
,!P
play changes as shown below.
Press the STORE/EXECUTE key after changing the master
level in order
to
store the newly edited master level.
The
dis-
Note:
You cannot enter
the
Edit mode while using
the
bypass func-
tion.
88
ADVANCED PITCH2
H+
ADVANCED PITCH2
The
function
is
by
pressing the Pressing the STORE/E=CUTE key stores the Patch whose
again.
master level has
been
changed to the same Patch number.
Cancel the store operation by pressing the
EXIT
key.
Changing
the Master Level
The master level of a Patch (master
of the direct
To store the Patch to a different Patch number, first press the
sound and effect sound)
cm
be
changed in the Play mode
by
STORE/EXECUTE key then select the destination Patch
using Data Entry Control
1.
number with the PATCH
VIA
keys. (You can confirm the
The master level value in the display is changed by rotating
number
from
the
PATCH
NO.
indicator.)
Data Entry Control
1,
changing the entire volume of the
9030.
Helpful
Hint:
The master volume setting made here
can
be
set indepen-
dently
and
stored for each Patch as
part
of the parameter
data
8
8
ADVANCED PITCH2
I-+
TubeAmp
Sound
of the Patch.
Refer
to
the following explanation on storing
The
Patch
name
is
indicated
next
to
the
selected
Patch
num-
Patches.
ber in the bottom line of the display. Pressing the
STORE/EXECUTE key again stores the Patch
to
the new
Patch number. Pressing the EXIT key cancels the store oper-
ation.
Note:
When a Patch is stored, the Patch which was previously
stored at the destination Patch number is automatically
erased.
Make absolutely sure that
the
Patch at the destina-
tion can
be
erased.
To Next Page
Loading...
