Zte ZXR10 ZSR V2 - Page 271

Chapter22IPv6QoSConguration
CongurationFlow
1.CreateaVLANsub-interfaceandcongureanIPaddressonthesub-interface.
2.CongureaVLANIDforthesub-interface.
3.Congure802.1pinheritance.
CongurationCommands
CongurationonR2:
R2(config)#interfacegei-1/1.1
R2(config-if-gei-1/1.1)#ipv6enable
R2(config-if-gei-1/1.1)#ipv6address7::1/64
R2(config-if-gei-1/1.1)#exit
R2(config)#interfacegei-1/2.1
R2(config-if-gei-1/2.1)#ipv6enable
R2(config-if-gei-1/2.1)#ipv6address8::1/64
R2(config-if-gei-1/2.1)#exit
R2(config)#vlan-configuration
R2(config-vlan)#interfacegei-1/1.1
R2(config-vlan-if-gei-1/1.1)#encapsulation-dot1q100
R2(config-vlan-if-gei-1/1.1)#exit
R2(config-vlan)#interfacegei-1/2.1
R2(config-vlan-if-gei-1/2.1)#encapsulation-dot1q200
R2(config-vlan-if-gei-1/2.1)#exit
R2(config-vlan)#exit
R2(config)#class-map802.1pmatch-allipv6
R2(config-cmap)#matchchild
R2(config-cmap)#exit
R2(config)#policy-map802.1p
R2(config-pmap)#class802.1p
R2(config-pmap-c)#setprecedenceinherit-from8021p
R2(config-pmap-c)#exit
R2(config-pmap)#exit
R2(config)#service-policygei-1/1.1input802.1p
OnR1andR3,itisonlynecessarytoconguretheVLANsub-interfacesandaddresses.
CongurationVerication
CheckthecongurationresultonR2,asshownbelow.
R2(config)#showclass-map802.1p
class-map802.1pmatch-allipv6
matchchild
R2(config)#showpolicy-map802.1p
policy-map802.1p
22-7
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential