Zte ZXR10 ZSR V2 - Page 274

ZXR10ZSRV2CongurationGuide(IPv6)
rotation:Apacketissenttoeachoutgoinginterfaceinturn.
<reload-delay>:conguresthedurationofdelayingstartupoftheinterfacestate
machine.Range:0–65535,unit:second,default:0second.
2.ConguretheoptionalparametersoftheIPv6VRRPinterfaceattributes.
StepCommandFunction
1ZXR10(config-vrrp)#interface<interface-name>EntersVRRPinterface
congurationmode.
ZXR10(config-vrrp-if-interface-name)#vrrp<vrid>
ipv6<ip-address>[secondary]
EnablesVRRPinVRRP
interfacecongurationmode,
andconguresavirtualIPv6
addressforVRRP .
ZXR10(config-vrrp-if-interface-name)#vrrp<vrid>
priority<level>
ConguresVRRPpriorityin
VRRPinterfaceconguration
mode.Therangeof<level>is
1-254.Thedefaultpriorityis
100.
ZXR10(config-vrrp-if-interface-name)#vrrp<vrid>
preempt{[delay<delay-time>]|[{disable}]}
ConguresVRRPgroup
preemptioninVRRPinterface
congurationmode.default:
preempt.
Thedefaultpreemptiondelay
is0.
ZXR10(config-vrrp-if-interface-name)#vrrp<vrid>
timersadvertise{<1-40>|msec<50-40000>}
Congurestheinterval(in
seconds)tosendVRRP
advertisementsinVRRP
interfacecongurationmode,
default:1.
<1-40>:measuredinseconds.
<50-40000>:Measuredin
milliseconds.
Theparametermsecis
optionalanditistochange
theunitoftheintervalto
millisecondfromsecond.
ZXR10(config-vrrp-if-interface-name)#vrrp
<vrid>timers{advertise{<adver-time-in-seconds>|msec
<adver-time-in-milliseconds>}|learn[disable]}
Setswhethertoenable
VRRPtolearnthetime
intervalbetweensuccessive
messages,default:no
2
23-2
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential