Zte ZXR10 ZSR V2 - Page 32

ZXR10ZSRV2CongurationGuide(IPv6)
StepCommandFunction
1ZXR10(config)#interface<interface-name>Entersinterfaceconguration
mode.
2ZXR10(config-if-interface-name)#ipv6enableEnablestheIPv6protocol.
ZXR10(config-if-interface-name)#ipv6address
<ipv6-address>/<prefix-length>
ConguresanIPv6address
onaninterface.
3
ZXR10(config-if-interface-name)#ipv6address
link-local<X:X::X:X>
CongurestheIPv6linklocal
addressoftheinterface.
<ipv6-address>:addressconguredfortheinterface.Theaddressformat(<X:X::X:X>)
followstheRFCspecications.IPv6addressesconsistofgroupsof16–bit
hexadeciamlvaluesseparatedbycolons(:).Youcanalsouseasimpliedform
supportedbyRFC.
<prefix-length>:prexlengthoftheIPv6address,whichisadecimalnumber(1–128)
indicatinghowmanybitsfromtheutmostleftoftheIPv6addressaretheaddress
prex.
<X:X::X:X>:link-localaddress,whichmustbeassignedwiththeprexfe80::/64.
2.CongureoptionalparametersoftheIPv6function.
CommandFunction
ZXR10(config-if-interface-name)#ipv6mtu<bytes>SetstheMaximumTransferUnit
(MTU)oftheIPv6packetsto
betransmittedontheinterface,
unit:bytes,range:1280to9202,
default:1500.
ZXR10(config-if-interface-name)#ipv6dad-attemps
<number>
Setsthemaximumoftimes
thattheinterfacedetectsthe
addressrepeatedly,range:0to
10,default:3.
3.Verifythecongurations.
CommandFunction
ZXR10#showipv6interface<interface-name>DisplaysdetailsaboutthespeciedIPv6
interface.
ZXR10#showipv6interfacebrief<interface-name>Displaysthebriefinformationaboutthe
speciedIPv6address.
–EndofSteps–
2-14
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential