Chapter 4 WAN
Basic Home Station VDSL2 P8701T User’s Guide
90
IPoA
This screen displays only when you set the DSL link type to IPoA for the ATM interface and
configure a WAN connection using the ATM interface.
Figure 26 WAN Configuration: IPoA
The following table describes the labels in this screen.
Option 125 Enable this to add vendor specific information to DHCP requests that the VDSL Router
sends to a DHCP server when getting a WAN IP address.
Use the following
Static IP address
Select this if you have a static IP address.
WAN IP Address Enter the static IP address provided by your ISP.
WAN Subnet
Mask
Enter the subnet mask provided by your ISP.
WAN gateway IP
Address
Enter the gateway IP address provided by your ISP.
Obtain an IPv6
address
automatically
Select this option to have the VDSL Router use the IPv6 prefix from the connected
router’s Router Advertisement (RA) to generate an IPv6 address.
Dhcpv6 Address
Assignment
Select this check box to obtain an IPv6 address from a DHCPv6 server.
The IP address assigned by a DHCPv6 server has priority over the IP address
automatically generated by the VDSL Router using the IPv6 prefix from an RA.
Use the following
Static IPv6 address
Select this option if you have a fixed IPv6 address assigned by your ISP.
WAN IPv6
Address/Prefix
Length
Enter the static IPv6 address and bit number of the IPv6 subnet mask provided by your
ISP.
WAN IPv6
Subnet Prefix
Length
Enter the bit number of the IPv6 subnet mask provided by your ISP.
WAN Next-Hop
IPv6 Address
Enter the gateway IPv6 address provided by your ISP.
Back Click this button to return to the previous screen.
Next Click this button to continue.
Table 22 WAN Configuration: IPoA
LABEL DESCRIPTION
WAN IP Address Enter the static IP address provided by your ISP.
WAN Subnet Mask Enter the subnet mask provided by your ISP.
Table 21 WAN Configuration: IPoE
LABEL DESCRIPTION
To Next Page
Loading...
Need help?
General
