ZyXEL Communications SBG3500-N000 - The Add New 3 G Dongle Screen; Add 3 G Dongle Information

Chapter 6 Broadband
SBG3500-N Series User’s Guide
118
6.4 The Add New 3G Dongle Screen
Use the Add New 3G Dongle screen to view and manage the list of 3G dongles the SBG3500-N
Series can use for a 3G backup connection.
Click Network Setting > Broadband > Add New 3G Dongle to display the following screen.
Figure 27 Network Setting > Broadband > Add New 3G Dongle
The following table describes the labels in this screen.
6.4.1 Add 3G Dongle Information
Click Add New Entry in the Add New 3G Dongle screen to show the following. Enter the
information for a new 3G dongle to add it.
Figure 28 Add 3G Dongle Information
Table 12 Network Setting > Network Setting > Add New 3G Dongle
LABEL DESCRIPTION
Add New Entry Click this to go to a screen where you can enter information for a new 3G dongle and add it.
See Section 6.4.1 on page 118 for more information
# This is the number of the entry.
Default
VID:PID
This is the default vendor ID and product ID of the 3G dongle.
Target VID:PID This is the target vendor ID and product ID of the 3G dongle.
Port This is the specified device port of the 3G dongle.
Class This is the target device class of the 3G dongle.
Message
Content
This shows the input message content of the 3G dongle.
Modify Click the Edit icon to modify the information of a 3G dongle.
Click the Delete icon to remove it.