Chapter 14 AP Profile
SBG3500-N Series User’s Guide
241
In the following example, layer-2 isolation is enabled on the SBG3500-N Series’ interface Vlan1. A
printer, PC and AP are in the Vlan1. The IP address of network printer (C) is added to the white list.
The connected AP then cannot communicate with the PC (D), but can access the network printer
(C), server (B), wireless client (A) and the Internet.
Figure 113 Layer-2 Isolation Application
14.7 Layer-2 Isolation Screen
This screen allows you to add Layer-2 isolation on the SBG3500-N Series and specific internal
interface(s). To access this screen click Network Setting > AP Profile > Layer-2 Isolation.
Note: You can have a maximum of 16 Layer-2 Isolation profiles on the SBG3500-N
Series.
Figure 114 Network Setting > AP Profile > Layer-2 Isolation
The following table describes the labels in this screen.
Table 80 Network Setting > AP Profile > Layer-2 Isolation
LABEL DESCRIPTION
Add New Profile Click the Add New Profile button to add new Layer-2 Isolation Profile.
# This field is a sequential value, and it is not associated with a specific profile.
Profile Name This field displays the Layer-2 Isolation Profile name.
Modify Click the Edit icon to edit the Layer-2 isolation profile.
Click the Delete icon to delete an existing Layer-2 isolation profile. Note that subsequent
Layer-2 isolation profile moves up by one when you take this action.
To Next Page
Loading...
