SBG3500-N Series User’s Guide
315
CHAPTER 29
IGMP Status
29.1 Overview
Use the IGMP Status screens to look at IGMP group status and traffic statistics.
29.2 The IGMP Group Status Screen
Use this screen to look at the current list of multicast groups the SBG3500-N Series has joined and
which ports have joined it. To open this screen, click System Monitor > IGMP Group Status.
Figure 164 System Monitor > IGMP Group Status
The following table describes the labels in this screen.
Table 126 System Monitor > IGMP Group Status
LABEL DESCRIPTION
Interface This field displays the name of an interface on the SBG3500-N Series that belongs to an
IGMP multicast group.
Multicast Group This field displays the name of the IGMP multicast group to which the interface belongs.
Filter Mode INCLUDE means that only the IP addresses in the Source List get to receive the
multicast group’s traffic.
EXCLUDE means that the IP addresses in the Source List are not allowed to receive
the multicast group’s traffic but other IP addresses can.
Source List This is the list of IP addresses that are allowed or not allowed to receive the multicast
group’s traffic depending on the filter mode.
To Next Page
Loading...
