ZyXEL Communications SBG3500-N000 - Configuring DDNS on Your SBG3500-N Series; Testing the DDNS Setting; Configuring the MAC Address Filter

Chapter 4 Tutorials
SBG3500-N Series User’s Guide
58
Then you will need to configure the same account and host name on the SBG3500-N Series later.
4.9.2 Configuring DDNS on Your SBG3500-N Series
Configure the following settings in the Network Setting > DNS > Dynamic DNS screen.
•Select Enable Dynamic DNS.
•Select www.DynDNS.com as the service provider.
•Type zyxelrouter.dyndns.org in the Host Name field.
• Enter the user name (UserName1) and password (12345).
Click Apply.
4.9.3 Testing the DDNS Setting
Now you should be able to access the SBG3500-N Series from the Internet. To test this:
1 Open a web browser on the computer (using the IP address a.b.c.d) that is connected to the
Internet.
2 Type http://zyxelrouter.dyndns.org and press [Enter].
3 The SBG3500-N Series’s login page should appear. You can then log into the SBG3500-N Series and
manage it.
4.10 Configuring the MAC Address Filter
Thomas noticed that his daughter Josephine spends too much time surfing the web and
downloading media files. He decided to prevent Josephine from accessing the Internet so that she
can concentrate on preparing for her final exams.
Josephine’s computer connects wirelessly to the Internet through the SBG3500-N Series. Thomas
decides to use the Security > MAC Filter screen to grant wireless network access to his computer
but not to Josephine’s computer.