Chapter 2 The Web Configurator
SBG3500-N Series User’s Guide
28
2.2.2 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document. See Chapter 5 on page 97 for more information about the Status screen.
If you click Virtual Device on the System Info screen, a graphic shows the connection status of
the Device’s ports. The connected interfaces are in color and disconnected interfaces are gray.
Figure 10 Virtual Device
2.2.3 Navigation Panel
Use the menu items on the navigation panel to open screens to configure SBG3500-N Series
features. The following tables describe each menu item.
Table 3 Navigation Panel Summary
LINK TAB FUNCTION
Status Click this to go to the main Web Configurator screen.
Network Setting
Broadband Broadband Use this screen to view and configure ISP parameters, WAN IP
address assignment, and other advanced properties. You can also add
new WAN connections.
3G WAN Use this screen to configure 3G WAN connection.
Add New 3G
Dongle
Use this screen to view or add a new 3G dongle.
Advanced Use this screen to enable or disable PTM over ADSL, Annex M, and
DSL PhyR functions.
802.1x Use this screen to view and configure the IEEE 802.1x settings on the
Device.
Multi-WAN Use this screen to configure the multiple WAN load balance and fail-
over rules to distribute traffic among different interfaces.
Wireless General Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
More AP Use this screen to configure multiple BSSs on the SBG3500-N Series.
MAC
Authentication
Use this screen to block or allow wireless traffic from wireless devices
of certain SSIDs and MAC addresses to the SBG3500-N Series.
WPS Use this screen to configure and view your WPS (Wi-Fi Protected
Setup) settings.
WMM Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
Others Use this screen to configure advanced wireless settings.
Channel Status Use this screen to scan wireless LAN channel noises and view the
results.
Scheduling Use this screen to set a schedule to turn off wireless LAN for power
saving purposes.
To Next Page
Loading...
