Chapter 2 The Web Configurator
SBG3500-N Series User’s Guide
29
LAN LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP Use this screen to turn UPnP and UPnP NAT-T on or off.
Additional
Subnet
Use this screen to configure IP alias and public static IP.
5th Ethernet
Port
Use this screen to configure the Ethernet WAN port as a LAN port.
Routing Static Route Use this screen to view and set up static routes on the SBG3500-N
Series.
Policy
Forwarding
Use this screen to configure policy routing on the SBG3500-N Series.
RIP
Use this screen to set up RIP settings on the SBG3500-N Series.
QoS General Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Queue Setup Use this screen to configure QoS queues.
Class Setup Use this screen to define a classifier.
Policer Setup Use these screens to configure QoS policers.
Monitor Use this screen to view QoS packets statistics.
NAT Port Forwarding Use this screen to make your local servers visible to the outside
world.
Applications Use this screen to configure servers behind the SBG3500-N Series.
Port Triggering Use this screen to change your SBG3500-N Series’s port triggering
settings.
Default Server Use this screen to configure a default server which receives packets
from ports that are not specified in the Port Forwarding screen.
ALG Use this screen to enable or disable NAT ALG and SIP ALG.
Address Mapping Use this screen to change your Device’s address mapping settings.
DNS DNS Entry Use this screen to view and configure DNS routes.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP
address.
Interface
Group/VLAN
Interface Group/
VLAN
Use this screen to create a new interface group, which is a new LAN
bridge interface (subnet).
USB Service USB Service Use this screen to enable file sharing via the SBG3500-N Series.
Security
Firewall General Use this screen to configure the security level of your firewall.
Service Use this screen to add Internet services and configure firewall rules.
Access Control Use this screen to enable specific traffic directions for network
services.
DoS Use this screen to activate protection against Denial of Service (DoS)
attacks.
MAC Filter MAC Filter Use this screen to block or allow traffic from devices of certain MAC
addresses to the SBG3500-N Series.
User Access
Control
User Access
Control
Use this screen to block web sites with the specific URL.
Table 3 Navigation Panel Summary (continued)
LINK TAB FUNCTION
To Next Page
Loading...
