Chapter 7 Wireless
SBG3500-N Series User’s Guide
144
The following table describes the labels in this screen.
7.7 The Others Screen
Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Others. The screen appears as shown.
See Section 7.9.2 on page 148 for detailed definitions of the terms listed in this screen.
Figure 44 Network Setting > Wireless > Others
Table 28 Network Setting > Wireless > WMM
LABEL DESCRIPTION
WMM Select On to have the SBG3500-N Series automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia
Quality of Service) gives high priority to voice and video, which makes them run more
smoothly.
WMM
Automatic
Power Save
Delivery
Select this option to extend the battery life of your mobile devices (especially useful for
small devices that are running multimedia applications). The SBG3500-N Series goes to
sleep mode to save power when it is not transmitting data. The AP buffers the packets sent
to the SBG3500-N Series until the SBG3500-N Series "wakes up". The SBG3500-N Series
wakes up periodically to check for incoming data.
Note: Note: This works only if the wireless device to which the SBG3500-N Series is
connected also supports this feature.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
To Next Page
Loading...
