Chapter 26 Network Status
SBG3500-N Series User’s Guide
309
26.3 The LAN Status Screen
Click System Monitor > Network Status > LAN to open the following screen. The figure in this
screen shows the interface that is currently connected on the SBG3500-N Series.
Figure 161 System Monitor > Network Status > LAN
The following table describes the fields in this screen.
26.4 The DHCP Client Screen
Click System Monitor > Network Status > DHCP Client to open the following screen. The
figure in this screen shows the number of client devices that are connected to the SBG3500
System Monitor > Network Status > DHCP Client
The following table describes the fields in this screen.
Error This indicates the number of frames with errors received on this interface.
Drop This indicates the number of received packets dropped on this interface.
Table 121 System Monitor > Network Status > WAN (continued)
LABEL DESCRIPTION
Table 122 System Monitor > Network Status > LAN
LABEL DESCRIPTION
Refresh Interval Select how often you want the SBG3500-N Series to update this screen.
Interface This shows the LAN or WLAN interface.
Bytes Sent This indicates the number of bytes transmitted on this interface.
Table 123 System Monitor > Network Status > LAN
LABEL DESCRIPTION
Refresh Interval Choose the screen refresh time (15, 30, 60 seconds) from the
drop-down list to see changes in the devices that are on the
network.
# This displays the device that is connected to the SBG3500-N
Series.
To Next Page
Loading...
