SBG3500-N Series User’s Guide
319
CHAPTER 31
AP Monitor
31.1 Overview
Use the AP Monitor screens to check status and information on the APs that are connected to the
SBG3500-N Series.
31.1.1 What You Can Do in this Chapter
•The AP List screen (Section 31.2 on page 319) displays which APs are currently connected to the
SBG3500-N Series.
•The Radio List screen (Section 31.3 on page 320) displays statistics about wireless radio
transmitters in each of the APs connected to the SBG3500-N Series.
•The Station List screen (Section 31.4 on page 321) displays statistics pertaining to the
connected stations (or “wireless clients”).
31.2 AP List Screen
Use this screen to manage all of the APs connected to the SBG3500-N Series. Click System
Monitor > AP Monitor > AP List.
Figure 166 System Monitor >AP Monitor > AP List
The following table describes the labels in this screen.
Table 128 System Monitor >AP Monitor > AP List
LABEL DESCRIPTION
# This field is a sequential value, and it is not associated with a specific profile.
Status This field displays the AP’s connection status with icons. For details on the different Status
states, see the next table.
Description This field indicates the AP’s associated description. The default description is “AP-” + the
AP’s MAC address.
Registration This field indicates whether the AP is registered with the managd AP list.
CPU Usage This field indicates what percentage of the SBG3500-N Series processing capability is
currently being used.
To Next Page
Loading...
