Chapter 42 Diagnostic
SBG3500-N Series User’s Guide
348
42.3 Ping & TraceRoute & NsLookup
Use this screen to ping, traceroute, or nslookup an IP address. Click Maintenance > Diagnostic >
Ping & TraceRoute & NsLookup to open the screen shown next.
Figure 191 Maintenance > Diagnostic > Ping & TraceRoute & NsLookup
The following table describes the fields in this screen.
42.4 802.1ag
Click Maintenance > Diagnostic > 8.2.1ag to open the following screen. Use this screen to
perform CFM actions.
Table 145 Maintenance > Diagnostic > Ping & TraceRoute & NsLookup
LABEL DESCRIPTION
Ping/TracerRoute Test
Bound Interface Choose a connected interface from the drop-down list (LAN, WAN) to perform the ping/
tracer route test.
Address Type the URL or IP address of a computer that you want to perform ping, traceroute, or
nslookup in order to test a connection.
Ping Click this to ping the IP address that you entered.
TraceRoute Click this button to perform the traceroute function. This determines the path a packet
takes to the specified computer.
Name Service lookup
Domain Name Type a domain name in this field for the name service lookup.
Nslookup Click this button to perform a DNS lookup on the IP address of a computer you entered.
To Next Page
Loading...
