Chapter 4 Tutorials
SBG3500-N Series User’s Guide
64
10 Now you may configure VPN to use the new certificate for authentication in the VPN > IPSec VPN
> Monitor screen.
4.13 Examples of Configuring IPSec VPN Rules
The first two examples show how to configure Site-to-Site rules with pre-shared secrets. The first
example uses 3DES encryption and the second one uses AES128.
The third example shows how to configure a Site-to-Site with Dynamic Peer rule using pre-shared
secret keys.
Finally, the fourth example shows how to configure remote access using pre-shared secrets.
4.13.1 Example 1: Use 3DES Encryption
1 Click the Add New Entry button in the VPN > IPSec VPN > Setup screen and enter the following
parameters:
General
Connection Name vpn1
Application Scenario Site-to-Site
My Address ETHWAN
Peer Gateway Address 22.23.24.25
Authentication
Key Exchange Mode Auto
Pre-Shared Key 1234567890
Phase 1
SA Life Time 28800
Negotiation Mode Main
Encryption 3DES
To Next Page
Loading...
