Chapter 19 User Access Control
SBG3500-N Series User’s Guide
265
19.2.1 Add/Edit a User Access Control Rule
Click Add new profile in the User Access Control screen to add a new rule or click the Edit icon
next to an existing rule to edit it. Use this screen to configure a restricted access schedule and/or
URL filtering settings to block the users on your network from accessing certain web sites.
Figure 132 User Access Control Rule: Add/Edit
The following table describes the fields in this screen.
Network
Service
This shows whether the network service is configured. If not, None will be shown.
Website Block This shows whether the website block is configured. If not, None will be shown.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 93 Security > User Access Control (continued)
LABEL DESCRIPTION
Table 94 User Access Control Rule: Add/Edit
LABEL DESCRIPTION
General
Active Select the checkbox to activate this User Access control rule.
User Access
Control Profile
Name
Enter a descriptive name for the rule.
To Next Page
Loading...
