Chapter 19 User Access Control
SBG3500-N Series User’s Guide
266
Network User Select the LAN user that you want to apply this rule to from the drop-down list box. If you
select Custom, enter the LAN user’s MAC address. If you select All, the rule applies to all
LAN users.
Internet Access Schedule
Day Select check boxes for the days that you want the SBG3500-N Series to perform User
Access control.
Time Drag the time bar to define the time that the LAN user is allowed access.
Network Service
Network
Service Setting
If you select Block, the SBG3500-N Series prohibits the users from viewing the Web sites
with the URLs listed below.
If you select Allow, the SBG3500-N Series blocks access to all URLs except ones listed
below.
Add new
service
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name, Protocol, and Name of the new rule.
# This shows the index number of the rule. Select the checkbox next to the rule to activate it.
Service Name This shows the name of the rule.
Protocol:Port This shows the protocol and the port of the rule.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Blocked Site/
URL Keyword
Click Add to show a screen to enter the URL of web site or URL keyword to which the
SBG3500-N Series blocks access. Click Delete to remove it.
Apply Click this button to save your settings back to the SBG3500-N Series.
Cancel Click Cancel to restore your previously saved settings.
Table 94 User Access Control Rule: Add/Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
