Chapter 4 Tutorials
SBG3500-N Series User’s Guide
41
Thomas has to configure the wireless network settings on the SBG3500-N Series. Then he can set
up a wireless network using WPS (Section 4.5.2 on page 43) or manual configuration (Section 4.5.3
on page 47).
4.5.1 Configuring the Wireless Network Settings
This example uses the following parameters to set up a wireless network.
1 Click Network Setting > Wireless to open the General screen. Select More Secure as the
security level and WPA2-PSK as the security mode. Configure the screen using the provided
parameters (see page 41). Click Apply.
SSID Example
Security Mode WPA-PSK
Pre-Shared Key DoNotStealMyWirelessNetwork
802.11 Mode 802.11b/g/n Mixed
To Next Page
Loading...
