Chapter 15 Interface Group
SBG3500-N Series User’s Guide
244
15.2.1 Interface Group Configuration
Click the Add New Interface Group button in the Interface Group/VLAN screen to open the
following screen. Use this screen to create a new interface group.
Note: An interface can belong to only one group at a time.
Figure 117 Interface Group Configuration
Group Name This shows the descriptive name of the group.
802.1q This shows the VLAN ID number (from 0 to 4094) of the interface group.
IPv4 This shows the IP address of the interface group where the traffic passes through.
Port Members This shows the tagged and untagged ports of the interface group.
Modify Click the Delete icon to remove the group.
Table 82 Network Setting > Interface Group/VLAN (continued)
LABEL DESCRIPTION
To Next Page
Loading...
