SBG3500-N Series User’s Guide
130
CHAPTER 7
Wireless
7.1 Overview
This chapter describes the SBG3500-N Series’s Network Setting > Wireless screens. Use these
screens to set up your SBG3500-N Series’s wireless connection.
7.1.1 What You Can Do in this Chapter
This section describes the SBG3500-N Series’s Wireless screens. Use these screens to set up your
SBG3500-N Series’s wireless connection.
•Use the General screen to enable the Wireless LAN, enter the SSID and select the wireless
security mode (Section 7.2 on page 131).
•Use the More AP screen to set up multiple wireless networks on your SBG3500-N Series
(Section 7.3 on page 138).
•Use the MAC Authentication screen to allow or deny wireless clients based on their MAC
addresses from connecting to the SBG3500-N Series (Section 7.4 on page 141).
•Use the WPS screen to enable or disable WPS, view or generate a security PIN (Personal
Identification Number) (Section 7.5 on page 142).
•Use the WMM screen to enable Wi-Fi MultiMedia (WMM) to ensure quality of service in wireless
networks for multimedia applications (Section 7.6 on page 143).
•Use the Others screen to configure wireless advanced features, such as the RTS/CTS Threshold
(Section 7.7 on page 144).
•Use the Channel Status screen to scan wireless LAN channel noises and view the results
(Section 7.8 on page 146).
To Next Page
Loading...
