Chapter 18 MAC Filter
SBG3500-N Series User’s Guide
262
18.2 The MAC Filter Screen
Use this screen to allow wireless and LAN clients access to the SBG3500-N Series. Click Security >
MAC Filter. The screen appears as shown.
Figure 130 Security > MAC Filter
The following table describes the labels in this screen.
Table 92 Security > MAC Filter
LABEL DESCRIPTION
MAC Address Filter Select Enable to activate the MAC filter function.
Set This is the index number of the MAC address.
Allow Select Allow to permit access to the SBG3500-N Series. MAC addresses not listed will
be denied access to the SBG3500-N Series.
If you clear this, the MAC Address field for this set clears.
Host name Enter the host name of the wireless or LAN clients that are allowed access to the
SBG3500-N Series.
MAC Address Enter the MAC addresses of the wireless or LAN clients that are allowed access to the
SBG3500-N Series in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
To Next Page
Loading...
