ZyXEL Communications SBG3500-N000 - Using Upnp in Windows XP Example

Chapter 8 LAN
SBG3500-N Series User’s Guide
169
8.5.1 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP
installed in Windows XP and UPnP activated on the SBG3500-N Series.
Make sure the computer is connected to a LAN port of the SBG3500-N Series. Turn on your
computer and the SBG3500-N Series.
8.5.1.1 Auto-discover Your UPnP-enabled Network Device
1 Click start and Control Panel. Double-click Network Connections. An icon displays under
Internet Gateway.
2 Right-click the icon and select Properties.
Figure 57 Network Connections
3 In the Internet Connection Properties window, click Settings to see the port mappings there
were automatically created.