Chapter 31 AP Monitor
SBG3500-N Series User’s Guide
321
The following table describes the labels in this screen.
The following table describes the icons in this screen.
31.4 Station List Screen
Use this screen to view statistics pertaining to the associated stations (or “wireless clients”). Click
System Monitor > AP Monitor > Station List to access this screen.
Figure 168 System Monitor > AP Monitor > Station List
Table 130 System Monitor > AP Monitor > Radio List
LABEL DESCRIPTION
# This field is a sequential value, and it is not associated with a specific profile.
Loading This indicates the AP’s load balance status (UnderLoad or OverLoad) when load
balancing is enabled on the AP. Otherwise, it shows - when load balancing is disabled or
the radio is in monitor mode. See below table for icons that appears in this field.
AP Description This field displays the description of the AP to which the radio belongs.
Model This field displays the model of the AP to which the radio belongs.
MAC Address This field displays the MAC address of the radio.
Radio This field displays the radio number on the AP to which it belongs.
Profile This field displays the profile name to which the radio belongs.
Frequency Band This field displays the wireless frequency currently being used by the radio.
Channel ID This field displays the radio’s channel ID.
Station This field displays the number of stations (aka wireless clients) associated with the radio.
Rx PKT This field displays the total number of packets received by the radio.
Tx PKT This field displays the total number of packets transmitted by the radio.
Rx FCS Error
Count
This field displays the number of received packets errors accrued by the radio.
Tx Retry Count This field displays the number of times the radio has attempted to re-transmit packets.
Action Click Action icon to add or delete the selected radio to the radio list.
Refresh Click Refresh button to see the latest changes to the SSID list.
Table 131 System Monitor > AP Monitor > Radio List Icons
LABEL DESCRIPTION
When an AP is being load balanced, this icon means it is operating over the maximum
allocated bandwidth.
When an AP is being load balanced, this icon means it is operating under the maximum
allocated bandwidth.
To Next Page
Loading...
