ZyXEL Communications SBG3500-N000 - Page 237

Chapter 14 AP Profile
SBG3500-N Series User’s Guide
237
Figure 110 Network Setting > AP Profile > Security > Add New Profile/Modify
The following table describes the labels in this screen.
Table 77 Network Setting > AP Profile > Security > Add New Profile/Modify
LABEL DESCRIPTION
General Settings
Profile Name Enter up to 31 alphanumeric characters for the profile name. This name is only visible in
the Web Configurator and is only for management purposes. Spaces and underscores
are allowed.
Mode Select a security mode from the list: wep, wpa, wpa2, or wpa2-mix.
Radius Settings
Radius Server Type Select External to use an external RADIUS server for authentication.
Primary /
Secondary Radius
Server Activate
Select this to have the SBG3500-N Series use the specified RADIUS server.
Radius Server IP
Address
Enter the IP address of the RADIUS server to be used for authentication.
Radius Server Port Enter the port number of the RADIUS server to be used for authentication.
Radius Server
Secret
Enter the shared secret password of the RADIUS server to be used for authentication.
MAC Authentication Setting