Chapter 34 Remote Management
SBG3500-N Series User’s Guide
329
The following table describes the fields in this screen.
Table 136 Maintenance > Remote MGMT
LABEL DESCRIPTION
Trust Domain
Status This field displays whether the Trust Domain is active or not.
IP Address Enter the Trust Domain IP address.
Add Click Add to add an IP address which the computer is allowed to access and manage the the
SBG3500-N Series.
Delete Click Delete to remove an IP address which the computer is not allowed to access and
manage the the SBG3500-N Series.
Edit Click Edit to make changes to the IP addresses which the computer is allowed to access and
manage the the SBG3500-N Series.
Services This is the service you may use to access the SBG3500-N Series.
LAN/WLAN Select the Enable check box for the corresponding services that you want to allow access to
the SBG3500-N Series from the LAN/WLAN.
WAN Select the Enable check box for the corresponding services that you want to allow access to
the SBG3500-N Series from the WAN.
Trust Domain Select the Enable check box for the corresponding services that you want to allow access to
the SBG3500-N Series from the Trust Domain.
Port You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Certificate
HTTPS
Certificate
Select a certificate the HTTPS server (the SBG3500-N Series) uses to authenticate itself to
the HTTPS client. You must have certificates already configured in the Certificates screen.
Apply Click Apply to save your changes back to the SBG3500-N Series.
Cancel Click Cancel to restore your previously saved settings.
To Next Page
Loading...
