Chapter 38 E-mail Notification
SBG3500-N Series User’s Guide
338
Figure 178 Email Notification > Add
The following table describes the labels in this screen.
Table 141 Email Notification > Add
LABEL DESCRIPTION
Mail Server Address Enter the server name or the IP address of the mail server for the e-mail address
specified in the Account Email Address field.
If this field is left blank, reports, logs or notifications will not be sent via e-mail.
Mail Server Port Choose a mail server port 25 or 587 from the drop-down list. Choose Port 25 if you’re
using mail server from your ISP. Choose port 587 if you are using your own mailserver
that is out of network with your ISP.
Authentication
Username
Enter the user name (up to 32 characters). This is usually the user name of a mail
account you specified in the Account Email Address field.
Authentication
Password
Enter the password associated with the user name above.
Account Email
Address
Enter the e-mail address that you want to be in the from/sender line of the e-mail
notification that the SBG3500-N Series sends.
If you activate SSL/TLS authentication, the e-mail address must be able to be
authenticated by the mail server as well.
Apply Click this button to save your changes and return to the previous screen.
Cancel Click this button to begin configuring this screen afresh.
To Next Page
Loading...
