Chapter 4 Tutorials
SBG3500-N Series User’s Guide
78
3 Fill out the following fields.
• VPN Name: Enter a name for your VPN configuration.
• Set VPN Server: This is the WAN IP address of the SBG3500-N Series, in this example,
172.16.1.2
• Enable Encryption: checked.
• DNS search domains: not used.
4 The new configuration will appear on the VPN settings screen. You can click the VPN name to
begin PPTP connection.
5 Enter the username and password of your user account configured on the SBG3500-N Series.
Note: The user account must have been configured in the Maintenance > User
Account screen. Refer to Chapter 33 on page 325.
6 You can see Connected when the PPTP VPN connection has been established. Click the connection
name to get connection details. There you can also disconnect.
To Next Page
Loading...
