Chapter 4 Tutorials
SBG3500-N Series User’s Guide
80
3 Select the PPTP tab. Enter the following fields.
• Description: Enter a name for your VPN configuration.
• Server: This is the WAN IP address of the SBG3500-N Series, in this example, 172.16.1.2.
• Account: This is the user account created on SBG3500-N Series for accessing the network via
VPN.
• RSA SecurID: Not used in this configuration.
• Password: This is the password for account.
• Secret: This is your pre-shared key for your VPN connection, in this example, 1234567890.
• Send All Traffic: This example uses the route-all configuration (ON).
4 Save the configuration.
5 The saved configuration will appear on the VPN screen. Select it and then slide the VPN bar to the
ON position. Your iOS device will begin PPTP connection.
To Next Page
Loading...
