Chapter 4 Tutorials
SBG3500-N Series User’s Guide
94
your iOS device displays. The example settings in these sections matches the L2TP VPN
configuration example in Section on page 81.
1 On your iOS device, select Home > Settings > General > Network.
2 Select VPN > Add VPN Configuration….
3 Select the L2TP tab. Enter the following fields.
• Description: Enter a name for your VPN configuration.
• Server: This is the WAN IP address of the SBG3500-N Series, in this example, 172.16.1.2.
• Account: This is the user account created on SBG3500-N Series for accessing the network via
VPN.
• RSA SecurID: Not used in this configuration.
• Password: This is the password for account.
• Secret: This is your pre-shared key for your VPN connection, in this example, 1234567890.
• Send All Traffic: This example uses the route-all configuration (ON).
To Next Page
Loading...
