Chapter 5 Status Screens
SBG3500-N Series User’s Guide
99
Memory
Usage
This field displays what percentage of the SBG3500-N Series’s memory is currently used.
Usually, this percentage should not increase much. If memory usage does get close to
100%, the SBG3500-N Series is probably becoming unstable, and you should restart the
device. See Section 41.2 on page 344, or turn off the device (unplug the power) for a few
seconds.
WAN Status
Status The field displays Up when the SBG3500-N Series is using the interface and Down when
the SBG3500-N Series is
Mode The field displays whether the interface is in Active or Passive mode.
IP Address The field displays the IP address of the interface.
Connection The field displays the connection type of the interface.
Speed (DL/UL) The field displays the speed of the interface’s connection.
IPSec VPN Status
# This is the VPN policy index number.
Name This field displays the identification name for the IPSec SA.
Application
Scenario
This field displays the scenario type for the IPSec SA.
Remote
Gateway
Address
This field displays the remote gateway Address used in the SA.
Table 5 Status Screen (continued)
LABEL DESCRIPTION
To Next Page
Loading...
