Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
121
2 Enter VPN as the name, select Default_L2TP_VPN_Connection and move it to
the Member box and click OK.
Figure 64 Configuration > Network > Zone > WAN Edit
7.1.4 Configure Port Roles
Here is how to remove port P6 from the ext-wlan interface and add it to the dmz
interface.
1 Click Configuration > Network > Interface > Role.
2 Under P6 select the dmz (DMZ) radio button and click Apply.
Figure 65 Configuration > Network > Interface > Port Roles Example
To Next Page
Loading...
