ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 - Configuration Menu

Chapter 3 Web Configurator
ZyWALL USG 100/200 Series User’s Guide
53
3.3.2.3 Configuration Menu
Use the configuration menu screens to configure the ZyWALL’s features.
Table 7 Configuration Menu Screens Summary
FOLDER OR
LINK
TAB FUNCTION
Quick Setup Quickly configure WAN interfaces or VPN
connections.
Licensing
Registration Registration Register the device and activate trial services.
Service View the licensed service status and upgrade
licensed services.
Signature
Update
Anti-Virus Update anti-virus signatures immediately or by a
schedule.
IDP/AppPatrol Update IDP signatures immediately or by a
schedule.
System Protect Update system-protect signatures immediately or
by a schedule.
Network
Interface Port Role Use this screen to set the ZyWALL’s flexible ports
as LAN1, WLAN, or DMZ.
Ethernet Manage Ethernet interfaces and virtual Ethernet
interfaces.
PPP Create and manage PPPoE and PPTP interfaces.
Cellular Configure a cellular Internet connection for an
installed 3G card.
WLAN Configure settings for an installed wireless LAN
card.
VLAN Create and manage VLAN interfaces and virtual
VLAN interfaces.
Bridge Create and manage bridges and virtual bridge
interfaces.
Auxiliary Manage the AUX port.
Trunk Create and manage trunks (groups of interfaces)
for load balancing and link High Availability (HA).
Routing Policy Route Create and manage routing policies.
Static Route Create and manage IP static routing information.
RIP Configure device-level RIP settings.
OSPF Configure device-level OSPF settings, including
areas and virtual links.
Zone Configure zones used to define various policies.
DDNS Profile Define and manage the ZyWALL’s DDNS domain
names.
NAT Set up and manage port forwarding rules.
HTTP Redirect Set up and manage HTTP redirection rules.