EasyManua.ls Logo

ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 - System Uptime

ZyXEL Communications USG-100@USG-200 - V2.20 ED 2
1157 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 9 Dashboard
ZyWALL USG 100/200 Series User’s Guide
232
Action Use this field to get or to update the IP address for the interface.
Click Renew to send a new DHCP request to a DHCP server.
Click the Connect icon to have the ZyWALL try to connect a PPPoE/PPTP
interface or the auxiliary interface. If the interface cannot use one of
these ways to get or to update its IP address, this field displays n/a.
Click the Disconnect icon to stop a PPPoE/PPTP or auxiliary interface’s
connection.
Extension Slot This section displays extension card slot and USB port status.
Slot This field displays the name of each extension slot.
Device This field displays the name of the device connected to the extension slot
(or none if no device is detected).
USB Flash Drive - Indicates a connected USB storage device and the
drive’s storage capacity.
Status The status for an installed WLAN card is none. For cellular (3G)
interfaces, see Section 10.11 on page 260 for the status that can appear.
Ready - A USB storage device connected to the ZyWALL is ready for the
ZyWALL to use.
Unused - The ZyWALL is unable to mount a USB storage device
connected to the ZyWALL.
System Status
System
Uptime
This field displays how long the ZyWALL has been running since it last
restarted or was turned on.
Current
Date/Time
This field displays the current date and time in the ZyWALL. The format
is yyyy-mm-dd hh:mm:ss.
VPN Status Click this to look at the VPN tunnels that are currently established. See
Section 9.2.1 on page 234.
DHCP Table Click this to look at the IP addresses currently assigned to the ZyWALL’s
DHCP clients and the IP addresses reserved for specific MAC addresses.
See Section 9.2.5 on page 237.
Current
Login User
This field displays the user name used to log in to the current session,
the amount of reauthentication time remaining, and the amount of lease
time remaining. See Chapter 40 on page 735.
Number of
Login Users
This field displays the number of users currently logged in to the
ZyWALL. Click the icon to pop-open a list of the users who are currently
logged in to the ZyWALL. See Section 9.2.6 on page 238.
Table 23 Dashboard (continued)
LABEL DESCRIPTION

Table of Contents

Related product manuals