Chapter 40 User/Group
ZyWALL USG 100/200 Series User’s Guide
742
40.3.1 Group Add/Edit Screen
The Group Add/Edit screen allows you to create a new user group or edit an
existing one. To access this screen, go to the Group screen (see Section 40.3 on
page 741), and click either the Add icon or an Edit icon.
Figure 490 Configuration > User/Group > Group > Add
The following table describes the labels in this screen.
# This field is a sequential value, and it is not associated with a specific
user group.
Group Name This field displays the name of each user group.
Description This field displays the description for each user group.
Member This field lists the members in the user group. Each member is separated
by a comma.
Table 197 Configuration > Object > User/Group > Group (continued)
LABEL DESCRIPTION
Table 198 Configuration > User/Group > Group > Add
LABEL DESCRIPTION
Name Type the name for this user group. You may use 1-31 alphanumeric
characters, underscores(
_), or dashes (-), but the first character cannot
be a number. This value is case-sensitive. User group names have to be
different than user names.
Description Enter the description of the user group, if any. You can use up to 60
characters, punctuation marks, and spaces.
To Next Page
Loading...
