Chapter 13 Interfaces
ZyWALL USG 100/200 Series User’s Guide
357
13.9.2 Bridge Add/Edit
This screen lets you configure IP address assignment, interface bandwidth
parameters, DHCP settings, and connectivity check for each bridge interface. To
access this screen, click the Add icon at the top of the Add column in the Bridge
Summary screen, or click an Edit icon in the Bridge Summary screen. The
following screen appears.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to return the screen to its last-saved settings.
Table 82 Configuration > Network > Interface > Bridge (continued)
LABEL DESCRIPTION
To Next Page
Loading...
