Chapter 44 AAA Server
ZyWALL USG 100/200 Series User’s Guide
777
44.3.1 Adding a RADIUS Server
Click Configuration > Object > AAA Server > RADIUS to display the RADIUS
screen. Click the Add icon or an Edit icon to display the following screen. Use this
screen to create a new AD or LDAP entry or edit an existing one.
Figure 513 Configuration > Object > AAA Server > RADIUS > Add
The following table describes the labels in this screen.
Table 217 Configuration > Object > AAA Server > RADIUS > Add
LABEL DESCRIPTION
Name Enter a descriptive name (up to 63 alphanumerical characters) for
identification purposes.
Description Enter the description of each server, if any. You can use up to 60
printable ASCII characters.
Server
Address
Enter the address of the RADIUS server.
Authentication
Port
Specify the port number on the RADIUS server to which the ZyWALL
sends authentication requests. Enter a number between 1 and 65535.
Backup Server
Address
If the RADIUS server has a backup server, enter its address here.
Backup
Authentication
Port
Specify the port number on the RADIUS server to which the ZyWALL
sends authentication requests. Enter a number between 1 and 65535.
To Next Page
Loading...
