Chapter 13 Interfaces
ZyWALL USG 100/200 Series User’s Guide
347
13.8.2 VLAN Add/Edit
This screen lets you configure IP address assignment, interface bandwidth
parameters, DHCP settings, and connectivity check for each VLAN interface. To
access this screen, click the Add icon at the top of the Add column or click an
Edit icon next to a VLAN interface in the VLAN Summary screen. The following
screen appears.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to return the screen to its last-saved settings.
Table 77 Configuration > Network > Interface > VLAN (continued)
LABEL DESCRIPTION
To Next Page
Loading...
