ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 - Turn on the ALG; Create the Address Objects

Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
174
7.13.1 Turn On the ALG
Click Configuration > Network > ALG. Select Enable SIP ALG and Enable
SIP Transformations and click Apply.
Figure 137 Configuration > Network > ALG
7.13.2 Create the Address Objects
Use Configuration > Object > Address > Add to create the address objects.
1 Create a host address object named IPPBX-DMZ for the IPPBX’s private DMZ IP
address of 192.168.3.9.
Figure 138 Creating the Address Object for the IPPBX’s Private IP Address