ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 - Application Patrol Statistics: Bandwidth Statistics

Chapter 10 Monitor
ZyWALL USG 100/200 Series User’s Guide
262
The following table describes the labels in this screen.
10.12.2 Application Patrol Statistics: Bandwidth Statistics
The middle of the Monitor > AppPatrol Statistics screen displays a bandwidth
usage line graph for the selected protocols.
Figure 245 Monitor > AppPatrol Statistics: Bandwidth Statistics
• The y-axis represents the amount of bandwidth used.
• The x-axis shows the time period over which the bandwidth usage occurred.
• A solid line represents a protocol’s incoming bandwidth usage. This is the
protocol’s traffic that the ZyWALL sends to the initiator of the connection.
• A dotted line represents a protocol’s outgoing bandwidth usage. This is the
protocol’s traffic that the ZyWALL sends out from the initiator of the connection.
• Different colors represent different protocols.
Table 42 Monitor > AppPatrol Statistics: General Settings
LABEL DESCRIPTION
Refresh
Interval
Select how often you want the statistics display to update.
Display
Protocols
Select the protocols for which to display statistics.
Select All selects all of the protocols.
Clear All clears all of the protocols.
Click Expand to display individual protocols. Collapse hides them.
Statistics for the selected protocols display after you click Apply.