ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 - How to Use a RADIUS Server to Authenticate User Accounts Based on Groups

Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
157
2 Click the Add icon again and create a rule for one of the user groups that is
allowed to access the DMZ.
Figure 114 Configuration > Firewall > Add
3 Repeat this process to set up firewall rules for the other user groups that are
allowed to access the DMZ.
7.8 How to Use a RADIUS Server to Authenticate
User Accounts based on Groups
The previous example showed how to have a RADIUS server authenticate
individual user accounts. If the RADIUS server has different user groups
distinguished by the value of a specific attribute, you can configure the make a
couple of slight changes in the configuration to have the RADIUS server
authenticate groups of user accounts defined in the RADIUS server.