ZyWALL USG 100/200 Series User’s Guide
413
CHAPTER 17
Zones
17.1 Zones Overview
Set up zones to configure network security and network policies in the ZyWALL. A
zone is a group of interfaces and/or VPN tunnels. The ZyWALL uses zones instead
of interfaces in many security and policy settings, such as firewall rules, Anti-X,
and remote management.
Zones cannot overlap. Each Ethernet interface, VLAN interface, bridge interface,
PPPoE/PPTP interface, auxiliary interface, and VPN tunnel can be assigned to at
most one zone. Virtual interfaces are automatically assigned to the same zone as
the interface on which they run.
Figure 312 Example: Zones
17.1.1 What You Can Do in this Chapter
Use the Zone screens (see Section 17.2 on page 415) to manage the ZyWALL’s
zones.
To Next Page
Loading...
