ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 - The Schedule Summary Screen

Chapter 43 Schedules
ZyWALL USG 100/200 Series User’s Guide
764
Finding Out More
• See Section 6.6 on page 113 for related information on these screens.
• See Section 50.4 on page 832 for information about the ZyWALL’s current date
and time.
43.2 The Schedule Summary Screen
The Schedule summary screen provides a summary of all schedules in the
ZyWALL. To access this screen, click Configuration > Object > Schedule.
Figure 504 Configuration > Object > Schedule
The following table describes the labels in this screen. See Section 43.2.1 on page
765 and Section 43.2.2 on page 766 for more information as well.
Table 211 Configuration > Object > Schedule
LABEL DESCRIPTION
One Time
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
Object
References
Select an entry and click Object References to open a screen that
shows which settings use the entry. See Section 13.3.2 on page 312 for
an example.
# This field is a sequential value, and it is not associated with a specific
schedule.
Name This field displays the name of the schedule, which is used to refer to the
schedule.
Start Day /
Time
This field displays the date and time at which the schedule begins.
Stop Day /
Time
This field displays the date and time at which the schedule ends.