ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 - The Login Users Screen; WLAN Interface Station Monitor Screen

Chapter 10 Monitor
ZyWALL USG 100/200 Series User’s Guide
256
10.8 The Login Users Screen
Use this screen to look at a list of the users currently logged into the ZyWALL. To
access this screen, click
Monitor > System Status > Login Users.
Figure 240 Monitor > System Status > Login Users
The following table describes the labels in this screen.
10.9 WLAN Interface Station Monitor Screen
The station monitor displays the connection status of the wireless clients
connected to (or trying to connect to) a IEEE 802.11b/g card installed in the
ZyWALL.
Table 38 Monitor > System Status > Login Users
LABEL DESCRIPTION
# This field is a sequential value and is not associated with any entry.
User ID This field displays the user name of each user who is currently logged in
to the ZyWALL.
Reauth Lease
T.
This field displays the amount of reauthentication time remaining and
the amount of lease time remaining for each user. See Chapter 40 on
page 735.
Type This field displays the way the user logged in to the ZyWALL.
IP address This field displays the IP address of the computer used to log in to the
ZyWALL.
Force Logout Click this icon to end a user’s session.
Refresh Click this button to update the information in the screen.