Chapter 50 System
ZyWALL USG 100/200 Series User’s Guide
879
50.14 Language Screen
Click Configuration > System > Language to open the following screen. Use
this screen to select a display language for the ZyWALL’s Web Configurator
screens.
Figure 580 Configuration > System > Language
The following table describes the labels in this screen.
Table 254 Configuration > System > Language
LABEL DESCRIPTION
Language Setting Select a display language for the ZyWALL’s Web Configurator
screens. You also need to open a new browser session to display the
screens in the new language.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
