Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
122
7.2 How to Configure a Cellular Interface
Use 3G cards for cellular WAN (Internet) connections. Table 273 on page 943 lists
the compatible 3G devices. In this example you install or connect the 3G card
before you configure the cellular interfaces but is also possible to reverse the
sequence.
1 Make sure the 3G device’s SIM card is installed.
2 Install the 3G device in the ZyWALL’s PCIMCIA slot or connect it to one of the
ZyWALL’s USB ports.
3 Click Configuration > Network > Interface > Cellular. Select the 3G device’s
entry and click Edit.
Figure 66 Configuration > Network > Interface > Cellular
To Next Page
Loading...
